Liberty BASIC Community Forum
Special Topics and Projects >> Hardware Interface Coding >> XBee/XBee-PRO S2C 802.15.4 RF Module
http://libertybasic.conforums.com/index.cgi?board=comport&action=display&num=1486833688

XBee/XBee-PRO S2C 802.15.4 RF Module
Post by prbaker95 on Feb 11th, 2017, 11:21am

Does anyone have any experience coding for the XBee/XBee-PRO S2C 802.15.4 RF Module? I have reviewed their website and see the commands but some coding examples would be very helpful.

Thanks

Phillip
Re: XBee/XBee-PRO S2C 802.15.4 RF Module
Post by Brandon Parker on Mar 23rd, 2017, 10:48am

Can you provide a reference site that you are looking at examples on or something specific that you are trying to do?


{:0)

Brandon
Re: XBee/XBee-PRO S2C 802.15.4 RF Module
Post by prbaker95 on Mar 23rd, 2017, 5:02pm

Thanks for responding Brandon. Their web site is https://www.digi.com/. You send commands to the device through a USB port with serial commands. I use a similar device using a USB to serial converter and sending com commands in hex. I was just wanting to see if anyone had used the XBee device with Liberty Basic.

Phillip


Re: XBee/XBee-PRO S2C 802.15.4 RF Module
Post by Brandon Parker on Apr 24th, 2017, 9:14pm

Phillip,
You should be able to use Liberty BASIC easily to send commands through a serial port (or USB device that has an appropriate driver that makes it appear as a serial port).

Give us a shout if you need any help.


[:0)

Brandon